8' Heavy-Duty Rear Blade with Hydraulic Angle and Category 2 3-Point Hitch

The Braber BE-RB408HDG is an 8' heavy-duty rear blade built for professional-grade grading and material moving. Mounting to a Category 2 3-point hitch and rated for tractors up to 80 HP, its 8' moldboard with hydraulic angle control lets you adjust the blade's angle on the go — straight from the seat — for fast, efficient work on big jobs.

With an 18" moldboard built from 5/16" steel, a 6" reversible cutting edge, and mechanical links for tilt and offset, the BE-RB408HDG is engineered for the heavy, high-torque grading that smaller blades can't handle.

Hydraulic Angling for Big Grading Jobs

The standout feature of the BE-RB408HDG is its integrated hydraulic angle cylinder with hoses, which lets you swing the blade angle hydraulically without leaving the tractor — adjusting on the fly as conditions change across a pass. Combined with mechanical links for tilt and offset, the blade can be set for crowning roads, cutting ditches, grading slopes, and windrowing material to either side. The 18" tall, 5/16" thick moldboard moves large volumes of material, and the 6" reversible cutting edge flips end-for-end as it wears to extend its life.

Features

Category 2 3-Point Hitch

The BE-RB408HDG mounts directly to the tractor's 3-point hitch:

• Category 2, 3-point hitch for professional tractor integration
• Rated for tractors up to 80 HP for high-torque grading
• No engine or PTO required — the blade grades by ground contact as it's pulled

Hydraulic Angle Control

An integrated hydraulic cylinder with hoses lets you adjust the blade angle on the go, straight from the tractor seat — for effortless, efficient angling across changing conditions. The blade requires 2 hydraulic ports for full functionality; confirm your tractor's hydraulic remotes before ordering.

Mechanical Tilt and Offset

Mechanical links provide precise tilt and offset control, letting you pitch the blade for ditching and crowning and shift it laterally for edge grading.

18" Moldboard, 5/16" Steel

An 18" moldboard height moves large volumes of material in each pass, and the 5/16" thick steel construction delivers the heavy-duty structural integrity demanding grading requires.

6" Reversible Cutting Edge

The 6" reversible cutting edge can be flipped end-for-end as it wears, doubling its usable life before replacement and keeping a sharp edge in the ground.

Built for Heavy-Duty Grading

With hydraulic angling and heavy-duty construction, the BE-RB408HDG is suited for:

• Grading and maintaining roads, lanes, and large driveways
• Spreading and leveling gravel and soil over large areas
• Cutting ditches and crowning roads
• Back-dragging, grading slopes, and moving material
• Pushing and clearing snow

Warranty

The BE-RB408HDG is backed by Braber Equipment's limited warranty — contact your dealer for current warranty terms and coverage details.

Product Specifications

• Mounting: Category 2, 3-Point Hitch
• Power Requirement: Up to 80 HP Tractor
• Working Width: 8' (96")
• Angle Control: Hydraulic Cylinder with Hoses
• Hydraulic Requirement: 2 Ports
• Tilt & Offset: Mechanical Links
• Moldboard Height: 18"
• Moldboard Thickness: 5/16" Steel
• Cutting Edge: 6", Reversible
• Weight: 970 lbs
• SKU: BE-RB408HDG
• Brand: Braber Equipment

Note: This blade requires a tractor with adequate hydraulic remotes. Performance varies with material type, ground condition, and available tractor horsepower. Product may vary slightly from images shown. Specifications are subject to change without notice — confirm details with your dealer prior to purchase.

Professional Hydraulic Grading — Built by Braber

The Braber BE-RB408HDG combines a Category 2 3-point hitch, hydraulic angle control, mechanical tilt and offset, and a heavy-duty 18" / 5/16" steel moldboard into one capable 8' rear blade. For professional grading on tractors up to 80 HP, the BE-RB408HDG angles on the fly and moves serious material.

BE-RB408HDG — 8' Heavy-Duty Rear Blade with Hydraulic Angle and Category 2 3-Point Hitch.