60" Flail Mower with Hammer Blades — Category 1 & 2 3-Point Hitch

The Braber BE-EFGC155H is a 60" flail mower equipped with hammer blades, built for heavy-duty mulching of grass, weeds, and brush. Mounting to a Category 1 & 2 3-point hitch with a fixed center hitch and driven by a 540 RPM PTO, it's matched to tractors in the 30–40 HP range — a capable mulching tool for utility tractors clearing larger acreage, orchards, and rough, overgrown ground.

An adjustable offset from 24" to 36" lets you trim along edges and under obstacles, a side belt drive delivers smooth power, and adjustable skid shoes set the cutting height — all on a sturdy 754 lb build.

Hammer Blades for Heavier Material

This version of Braber's 60" flail mower comes fitted with 24 hammer blades — the heavier-duty blade option built to tackle dense weeds, brush, and small saplings that finer grass knives can't handle. The hammer-flail design delivers aggressive cutting through tough, overgrown vegetation, pulverizing woody material into fine mulch — making the BE-EFGC155H the right choice for clearing and reclaiming overgrown ground. (The flail/grass-knife configuration is available as the BE-EFGC155F for a finer cut on grass; the mower accepts 48 flails or 24 hammers, so blades can be changed to suit the job.)

Mulch Cleanly, Without Throwing Debris

A flail mower works differently from a rotary cutter, and that difference is its biggest advantage. Instead of a few large blades, a flail mower uses a high-speed rotor fitted with many small, free-swinging blades. As the rotor spins, the blades shear the material and throw it up and over the rotor, dropping it back to the ground finely mulched — without throwing debris sideways. That makes the BE-EFGC155H far safer to run near buildings, fences, roads, and people, and leaves a cleaner, more even finish. Because the blades swing freely on the rotor, they deflect off rocks and obstacles rather than breaking, and the precise blade overlap means no uncut strips.

Features

Category 1 & 2 3-Point Hitch and 540 PTO

The BE-EFGC155H mounts and powers up directly from your tractor:

• Category 1 & 2, 3-point hitch with a fixed center hitch
• 540 RPM PTO drive
• Matched to tractors in the 30–40 HP range

24 Hammer Blades

Fitted with 24 hammer blades for heavy-duty mulching of dense weeds, brush, and small saplings, the BE-EFGC155H handles tougher material than a grass-knife setup. The mower also accepts 48 flails if you want to switch to a finer grass cut.

Side Belt Drive

A side belt drive transfers power smoothly from the gearbox to the rotor, maintaining blade speed and reducing the vibration that wears components — a dependable, proven drive arrangement.

Adjustable Offset (24" to 36")

The mower's adjustable offset from 24" to 36" lets you shift the deck to the side of the tractor, for trimming along edges, under fences, and beneath obstacles that a center-mounted mower can't reach.

Adjustable Skid Shoes

Adjustable skid shoes set and hold the cutting height precisely, protecting the rotor and giving consistent results across uneven ground.

Stable Footprint

At a 66.5" overall width over a 60" working width, the BE-EFGC155H covers ground efficiently with a stable, balanced footprint.

Built for Mulching and Ground Clearing

With hammer blades and clean, contained mulching, the BE-EFGC155H is suited for:

• Heavy-duty mulching of weeds, brush, and small saplings on larger acreage
• Clearing and reclaiming overgrown areas
• Maintaining orchards, vineyards, and nurseries
• Trimming along edges, fences, and under obstacles with the offset
• Mowing where thrown debris would be a hazard, such as near buildings and roadsides

Warranty

The BE-EFGC155H is backed by Braber Equipment's limited warranty — contact your dealer for current warranty terms and coverage details.

Product Specifications

• Mounting: Category 1 & 2, 3-Point Hitch (Fixed Center Hitch)
• Drive: 540 RPM PTO, Side Belt Drive
• Power Requirement: 30–40 HP Tractor
• Working Width: 60"
• Overall Width: 66.5"
• Blades: 24 Hammers (Equipped); Accepts 48 Flails
• Offset: Adjustable, 24" to 36"
• Cutting Height: Adjustable Skid Shoes
• Weight: 754 lbs
• SKU: BE-EFGC155H
• Brand: Braber Equipment

Note: Performance varies with material type, density, and ground conditions, as well as available tractor horsepower. Product may vary slightly from images shown. Specifications are subject to change without notice — confirm details with your dealer prior to purchase.

Clean, Safe Mulching — Built by Braber

The Braber BE-EFGC155H combines a Category 1 & 2 3-point hitch, 540 PTO side belt drive, 24 hammer blades, and an adjustable offset into one capable 60" flail mower built for heavier material. For mulching weeds, brush, and saplings cleanly and safely, the BE-EFGC155H gets the job done.

BE-EFGC155H — 60" Flail Mower with Hammer Blades, Category 1 & 2 3-Point Hitch.